BMW K25 R1200GS - Manuel d'utilisateur télécharger pdf (Page 10)

Place fairing bracket (6) in position (arrow).

Install screw (5).

Tightening torques

Fuel tank with bracket to front frame

M8 x 45 - 10.9

19 Nm

Check the O-rings in quick-action couplings (2) for damage; replace if

necessary.

Lubricate the quick-action couplings to facilitate assembly.

Lubricant

Molykote 111

11 00 7 660 832

Attention

Lightly touching the latching pin of the female connector can cause the

connector to latch. If this happens and force is applied in an attempt to

close the male and female elements of the quick-action coupling, damage

to the O-rings can result, and the O-rings will leak.

Make sure that the latch is open/pressed when you connect the two

elements of the quick-action couplings in the fuel lines.

Open the latches on the female couplings of fuel delivery lines (2) and,

applying light pressure, press the male adapter into the female coupling.

The couplings engage with an audible click.

Connect plug for fuel pump (3) and plug for fuel level sensor (4).

(-) Connecting BMW Motorrad diagnostic system to motorcycle

Note

BMW-Motorrad - 0450 - R 1200 GS, K25 31

10/12

122012

1 2 ... 5 6 7 8 9 10 11 12

Pas de commentaire

BMW K25 R1200GS - Manuel d'utilisateur Page 10