BMW ONBOARD COMPUTER Manuel de service télécharger pdf (Page 51)

Mirrors

Adjusting mirrors

Adjust the mirror by twisting

the casing and the mirror arm

into the desired position.

Spring preload

Setting

It is essential to set spring pre-

load of the rear suspension to

suit the load carried by the mo-

torcycle. Increase spring preload

when the motorcycle is heavily

loaded and reduce spring preload

accordingly when the motorcycle

is lightly loaded.

Adjusting spring preload

for rear wheel

Removing seat ( 53).

Remove on-board toolkit 1.

Your motorcycle's hand-

ling will suffer if you do not

match the spring-preload and

damping-characteristic settings.

Adjust the damping characteristic

to suit spring preload.

If you want to increase spring

preload, use the tool from the

on-board toolkit to turn the

dial 1 clockwise.

If you want to reduce spring

preload, use the tool from the

on-board toolkit to turn the

dial 1 counter-clockwise.

Operation

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 147 148

Pas de commentaire

BMW ONBOARD COMPUTER Manuel de service Page 51