BMW On-Board Computer Manuel de service télécharger pdf (Page 58)

on again. If the daytime riding

light is active, the daytime rid-

ing light symbol is displayed in

the multifunction display.

Manual operation of the

light when the automatic

system is switched on

with daytime riding lights

OE

If the button for the daytime

riding light is pressed, the day-

time riding light is switched off

and the low beam headlight

and front side lights will be ac-

tivated (e. g. when driving into

tunnels, where the automatic

daytime riding light only re-

sponds with some delay due to

the ambient brightness). If the

daytime riding light is switched

off the auxiliary headlight is

switched on again.

If the daytime riding light

button is pressed again, the

automatic daytime riding light

is activated again, that is, the

daytime riding light will be

switched on again once the

required ambient brightness is

switched on again.

Turn indicators

Operate the flashing turn

indicators

Switch on the ignition.

Push button 1 to the left to

switch on the left flashing turn

indicators.

Push button 1 to the right to

switch on the right flashing turn

indicators.

Centre button 1 to cancel the

flashing turn indicators.

The turn indicators are can-

celled automatically after

you have ridden for approximately

10 seconds and covered a dis-

tance of about 300 m.

Hazard warning

flashers

Operating hazard warning

flashers

Switch on the ignition.

The hazard warning flash-

ers place a strain on the

battery. Do not use the hazard

warning flashers for longer than

absolutely necessary.

If you press a turn-indic-

ator button with the ignition

switched on, the turn-indicator

function is activated instead of

the hazard warning flashers, and

remains active until you release

4

56

z

Operation

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 183 184

Commentaires sur ces manuels

Pas de commentaire