18
E46 Driver information
Reset using Diagnosis Program
• Connect the Diagnosis head to the diagnostic connector of the vehicle.
• Identify the vehicle and perform the
Short Test.
• Select
Function Selection
and then
Service Functions.
•
Highlight
Reset Service Interval Indicator
(Test module S6211-00001)
• Select
with tester
.
• Follow the directions from the help information in the test module (upper right corner).
• Select which service is to be reset and press the continue key.
• An acknowledgement is displayed on the screen that the reset has been carried out.
Instrument Cluster Replacement
If the instrument cluster (Kombi) is replaced the SI data can be retrieved from the LSZ on
E46 vehicles and from the LCM III on the E52. Coding procedures are the same as SIA II.
Diagnosis
Diagnosis of the SIA System is carried out using the Diagnosis program of the DISplus or
MoDiC III.
System Test: Also possible
from the Instrument Cluster Self
Test, the Display Test illuminates
the Service Interval Display. To
enter the test:
• Function Selection
• Service Functions
• Body
• Instrument Cluster
• System Test
• Test Schedule
Test Modules: Problems with the SIA System can be diagnosed
using fault or Symptom driven test modules. To begin diagnosis:
• Short Test
• Select Symptom from Symptom selection page
• Select Test module from Test Plan Page
• Test Schedule
Read SIA Data: Displays
Instrument cluster data as well as
SIA data. SIA data allows the tech-
nician to verify that the SIA system
is using the proper calculation as
well as viewing the current status
of the system. To enter
• Function Selection
• Service Functions
• Body
• Instrument Cluster
• Service Interval Indicator Data
• Test Schedule
Commentaires sur ces manuels