BMW Motorrad Navigator IV Manuel du propriétaire télécharger pdf (Page 21)

BMW Motorrad Navigator IV Owner’s Manual 19

Using Hands-free Calling

Using Hands-free

Calling

Using Bluetooth technology, your Navigator

IV can connect to your mobile phone and

wireless headset/helmet to become a hands-

free device.

To determine whether your device with

Bluetooth technology is compatible with the

Navigator IV, go to www.garmin.com

/bluetooth.

 While most phones and headsets

are supported and can be used, it cannot

be guaranteed that a particular phone or

headset can be used. All features may not

be available for your phone.

Pairing Your Devices

Bluetooth wireless technology establishes

a wireless link between devices, such as a

mobile phone and the Navigator IV. The rst

time you use two devices together, you must

“pair” them by establishing a relationship

using a PIN/passkey. After the initial pairing,

the two devices can connect automatically

each time you turn them on.

To pair and connect, your device and the

Navigator IV must be turned on and be

within 33 feet (10 meters) of each other. The

Navigator IV can be connected to a phone

and a headset at the same time.

Initiate pairing from your Navigator IV or

from your device. Refer to the instructions

for your devices.

When you turn on the Navigator IV, it tries

to connect to the last device to which it was

connected. You might have to set your device

to connect to the Navigator IV automatically

when it is turned on.

When your phone is connected to your

Navigator IV, you are ready to make phone

calls. From the Menu page, touch  to

access the Phone menu.

Pairing Your Phone Using the

Phone

1. From the Menu page, touch Tools >

Settings > Bluetooth > Enabled.

2. Enable the Bluetooth component on your

phone. This might be in a menu called

Settings, Bluetooth, Connections, or

Hands-free.

3. Initiate a search for Bluetooth devices.

4. Select the Navigator IV from the list of

devices.

5. Enter 1234 into your phone.

Pairing the Navigator IV with

Your Mobile Phone

1. From the Menu page, touch Tools >

Settings > Bluetooth > Enabled.

2. Under Phone, touch Add.

3. Enable the Bluetooth component on your

phone. Enable Find Me/Discoverable/

Visible mode. These settings might be in

a menu called Bluetooth, Connections, or

Hands-free.

4. Touch OK on the Navigator IV.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Commentaires sur ces manuels

Pas de commentaire