BMW SERIE 3 COUPE 2000 Manuel du propriétaire télécharger pdf (Page 64)

62n

0 Steering lock engaged

The key can only be inserted and

removed in this position.

After removing the key, turn the steer-

ing wheel slightly to the left or right until

you hear the lock engage.

If the key is not removed, an acoustic

signal chimes after the driver's door has

been opened.

Vehicles with automatic

transmission:

Move the selector lever from position P

only after the engine is running (ignition

key in position 2).

In order to turn the key back to position 0

or to remove it, move the selector lever

into position P first (Interlock).<

462de195

1 Steering lock disengaged

Turning the steering wheel slightly to

the right or left often makes it easier to

turn the key from 0 to 1.

Individual electrical devices are ready

for operation.

2 Ignition on

All electrical equipment and accesso-

ries are available for use.

3 Starting the engine

Vehicles with manual

transmission:

Step on the clutch when starting the

vehicle. A lockout prevents the engine

from starting if the clutch is not de-

pressed.c

Before starting

> Engage parking brake

> Ensure that the transmission selector

is in "Neutral" (or "Park" if vehicle is

equipped with automatic transmis-

sion)

> Manual transmission: Depress the

clutch pedal

> Automatic transmission: Depress the

footbrake.

Never allow the engine to run with

the vehicle standing in an en-

closed area. The exhaust gases contain

carbon monoxide, an odorless and col-

orless, but highly toxic gas. Breathing

the exhaust gases poses an extreme

health risk, and can lead to uncon-

sciousness and death.

Do not leave the car unattended with

the engine running. An unattended ve-

hicle with a running engine represents a

potential safety hazard.<

> Start the engine. Do not press the

accelerator pedal.

Steering/ignition lock Starting the engine

Online Edition for Part No. 01 41 0 155 026 - © 6/99 BMW AG

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 188 189

Commentaires sur ces manuels

Pas de commentaire