Bmw 330XI Manuel d'utilisateur télécharger pdf (Page 18)

18

Indicator and warning lamps

Technology that monitors itself

Indicator and warning lamps that are

identified by

●

are tested for proper

functioning whenever the ignition key is

turned. They each light up once for dif-

ferent periods of time.

If a fault should occur in one of these

systems, the corresponding lamp does

not go out after the engine is started, or

it lights up while the vehicle is moving.

You will see how to react to this below.

Red: stop immediately

Battery charge current

●

The battery is no longer being

charged. Indicates a defective

alternator drive belt or a problem with

the alternator's charge circuit. Please

contact the nearest BMW center.

If the drive belt is defective, stop

and switch off the engine immedi-

ately to prevent overheating and seri-

ous engine damage. If the drive belt is

defective, increased steering effort is

also required.

<

Engine oil pressure

●

Stop the vehicle immediately

and switch off the engine.

Check the engine oil level; top off as

required. If the oil level is correct:

Please contact the nearest BMW cen-

ter.

Do not continue driving, as the

engine could sustain serious dam-

age from inadequate lubrication.

<

Brake warning lamp

●

If the lamp comes on when the

parking brake is not engaged:

check the brake fluid level. Before driv-

ing further, be sure to comply with the

instructions on pages 116 and 129

Parking brake warning lamp for

Canadian models.

Tire Pressure Monitor (TPM)/Flat

Tire Monitor

●

In addition, an acoustic signal is

sounded: a tire failure has occurred.

Reduce vehicle speed immediately and

stop the vehicle. Avoid hard brake

applications. As you steer the vehicle,

use caution and avoid overcorrecting.

For additional information: refer to

pages 85, 86

Red and yellow: continue driving

cautiously

The brake warning lamp comes

on together with the yellow indi-

cator lamps for ABS

●

and

ASC+T/DSC:

The entire ABS, CBC,

ASC+T/DSC and ADB/ADB-X/

DBC control system has failed.

Continue driving cautiously and

defensively. Avoid hard brake applica-

tions. Please have the system checked

by your BMW center as soon as possi-

ble.

Additional information beginning on

page 78

CBC, ABS and ASC+T/DSC and

ADB/ADB-X/DBC indicator and

warning lamps for Canadian

models.

Online Edition for Part-No. 01 41 0 156 804 - © 09/02 BMW AG

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 165 166

Commentaires sur ces manuels

Pas de commentaire