BMW 228i Manuel du propriétaire télécharger pdf (Page 201)

Accessing the turn signals and low beams

Follow general instructions, refer to page 195.

1. In the wheel house, loosen the two brack‐

ets and remove the cover.

Turn signal

21-watt bulb, PY21W

If necessary, pull the inside trim of the

wheel house slightly inward. Turn the bulb

socket counterclockwise and remove.

2. Press the bulb gently into the socket, turn

counterclockwise and remove.

3. Install the new bulb and bulb holder in re‐

verse order of removal.

4. Attach the cover to the wheel house.

Low beams

55-watt bulb, H7.

1. Turn the cover counterclockwise and re‐

move.

2. Tilt the bulb down and then up to loosen it

from the holder and remove.

3. Pull the connector off the bulb.

4. Attach the connector to the new bulb.

5. First insert the bulb at the top with the

strap, arrow 1, and then press down firmly,

arrow 2. The bulb must audibly latch in

place.

6. Close the headlight housing with the lid.

Make sure that the lid engages.

7. Attach the cover to the wheel house.

Seite 197

Replacing components Mobility

197

Online Edition for Part no. 01 40 2 959 847 - II/15

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 233 234

Pas de commentaire

BMW 228i Manuel du propriétaire Page 201