BMW Radio and Information Systems Manuel du propriétaire télécharger pdf (Page 18)

17n

OverviewSettingsReceptionPlayingIndex

Selecting a station by name

RDS — Radio Data System

Thanks to specially designed systems,

limitations inherent in mobile reception

quality have been partially minimized:

The Radio Data System (RDS) transmits

information in the FM reception range.

RDS stations thus offer the following

characteristics:

The station name will be indicated in

the display after the RDS signals

have been evaluated

Additional information can be indi-

cated or called up in the display (e.g.

text broadcasts from the station,

PTY).

However, the reception of RDS data is

only possible under favorable reception

conditions. If there is weak or inter-

rupted reception, it can take quite a

while before the transmitter name

appears in the display.

Selecting a station

1. Switch on the RDS with

"RDS " will appear in the display

along with the name of the current

station, if it is broadcasting RDS

information

2. Start the scan with

Press or hold down.

The scan mode begins with the

station that was last set.

The scan mode is stopped as soon

as a station is found.

Switch off the RDS with

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Pas de commentaire

BMW Radio and Information Systems Manuel du propriétaire Page 18